Newsgroups: rec.radio.amateur.misc
From: little@nuts2u.enet.dec.com (nuts2u::little)
Subject: Re: Mods for ft726r to do 9600
Message-ID: <1993May12.183242.8842@nntpd2.cxo.dec.com>
Sender: usenet@nntpd2.cxo.dec.com (USENET News System)
Organization: Digital Equipment Corporation
References: <jjkUs*pC2@lemsys.UUCP>
Date: Wed, 12 May 1993 20:32:28 GMT
X-Posted-Via: NEWS-NOTES gateway (a hack!)
Lines: 19

    From James Miller G3RUH:
    
    Inject your modem TXaudio directly to the transmitter varactor in the
    SAT unit via J04 pin 2.
    
    1. Remove the main lid; remove the SAT unit lid.
    2. Locate J04 which is a 3 wire connector in the front left-hand corner.
    3. Unplug J04, and inject your audio on pin 2, ground on pin 1, using a
       screened cable.
    
    This is of course assuming you are using a G3RUH or K9NG 9600 baud FSK
    modems.  The receive side needs to come straight from the discriminator
    which I haven't had a chance to locate yet.  Perhaps if someone else
    has the necessary hook up information for the receive side, they could
    post it here.
    
    73,
    Todd
    N9MWB